微分法在定位误差分析与计算中的应用

介绍了微分法分析计算定位误差的原理和适用范围,通过生产实例分析,证明了该方法在解决多误差因素定位误差分析与计算中的简便与快捷,从而有效简化了复杂定位方案定位误差的分析与计算,提高了夹具的设计效率。     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.     

振动试验极限控制应用实例

介绍了某产品振动应力筛选试验，通过对产品采用极限控制，并组合配以虚拟参考点（2点控制）以及响应点（2点控制）的方式，保证产品在试验过程中不会受到过强的力学应力，避免产品内部敏感元件的损坏。这种振动试验与常见的振动试验有很多不同点，从某产品振动试验实践，阐述此类试验有关技术问题。     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

飞机重心位置的计算分析方法

飞机重心位置对飞机的安定性和操纵性影响很大.不在飞机重心允许范围内装货或载客时,会使飞机操纵性和安定性变差,影响飞行安全.飞机重心位置计算分析是新型飞机研制、现役飞机加改(换)装设计等工程中必不可少的一个重要环节.以某型现役飞机进口短波单边带电台换装国产短波自适应/跳频电台工程作为研究对象,研究了基于力矩平衡法的飞机重心位置计算方法,计算了该型飞机换装短波电台后空机重心位置.计算结果表明,该型飞机进口短波电台换装国产短波电台后,空机状态下的重心位置满足重心允许范围要求.     

PWM变频器供电的感应电机传热特性

为了探究电动机在脉宽调(Pulse width modulation，PWM)变频器供电下的传热特性，近一步揭示变频参数（调制比）对电动机温升分 布的影响特征,以一台采用PWM变频器供电下55 kW驱动用感应电机为例，基于流体力学及传热学基本原理，结合电机通风结构特征，建立外部包裹有空气域的三维流热耦合求解域模型，并采用有限体积元法对电机内的温度场进行了数值研究。此外，针对PWM不同调制比控制条件下电动机全域内的传热特性进行了对比分析，结果表明：两个不同调制比控制条件下电机求解域 内各主要部件温升分布趋势大致相同；径向上，转子部分温升较高，在气隙位置温升出现阶跃式变化，定子部分温升较低；轴向上，电机各部分近风端温升较低，远风端温升较高；周向上，定子轭部温升呈波浪式变化。     

降落伞自动开伞器技术现状及发展方向

自动开伞器是为保障开伞安全而与降落伞配套使用的关键航空器材,为能总体把握其技术发展状况,促进自动开伞技术不断完善和发展,首先从工作原理上概述了三类机械式自动开伞器的技术状况,然后立足当前机械式自动开伞器的使用现状和存在问题,探讨和提出了我国自动开伞器应向机电式和电子式方向发展的技术前景。     

新一代机载悬挂物管理系统需求分析

针对当前悬挂物管理系统的局限性,结合国外先进战机悬挂物管理系统功能,对我国下一代机载悬挂物管理系统需求进行分析,从FC总线技术、开放式系统架构、多挂点混挂技术、悬挂发射装置控制技术、武器数据链技术5个方面进行了具体的描述,为悬挂物管理系统设计指明了方向.